By Alex Mandl
Alex is the Principal of Shrapnel Explosive Solutions, a dangerous goods and compliance consultancy. He is also a former Chief Inspector of Explosives for Queensland.
What consignors, freight forwarders, carriers, depot operators, receivers and their customers need to consider.
Australia is progressing towards a significant change in the regulation of explosives transport, with provisions from the Australian Explosives Code (AEC) proposed for incorporation into the Australian Dangerous Goods Code (ADG Code).
For carriers, freight forwarders and their customers, the priority is to understand how the proposed requirements compare with existing obligations and identify what preparation may be necessary.
Current guidance indicates that the revised Code is expected to commence during 2027. However, this remains a target rather than a confirmed commencement date.
Where the Reform Stands
The National Transport Commission (NTC) finalised the new ADG Code in late 2025 for consideration by state transport ministers. Publication is expected following formal approval, with commencement anticipated during 2027, subject to an implementation schedule developed with states and territories.
That schedule is intended to provide sufficient time for legislative amendments and industry preparation.
Importantly, publication of the revised Code, its legal commencement and the expiry of transitional arrangements are separate milestones.
The explosives provisions released for consultation in October 2024 remain proposals and should not be interpreted as final legal requirements. Until the relevant changes are formally adopted, operators must continue complying with the requirements applicable to their activities and jurisdictions.
Understanding What Is Changing and What Already Exists
The Australian Explosives Code, third edition, was published in 2009. Its proposed incorporation into the ADG Code is intended to establish an ongoing maintenance framework and improve alignment with international developments.
However, explosives licensing and legislative implementation will remain matters for individual jurisdictions.
Businesses should not assume that incorporating explosives transport provisions into the ADG Code will remove existing licence conditions or automatically establish national recognition of approvals.
Several important controls already exist under the AEC, including:
- Three risk categories under Table 2.1.
- Compatibility requirements under Chapter 7.
- Transport documentation requirements under Chapter 8.
- Security plans and monitoring requirements for high security risk loads under Section 8.8.
These are established obligations, not entirely new requirements introduced by the proposed reforms.
For existing explosives carriers, the starting point should be to compare current procedures against the final provisions once published.
For general freight operators considering entering the Class 1 transport sector, the more immediate question is whether their existing authorisations, vehicles, personnel and depot facilities are suitable for the explosives they intend to carry.
Fleet and Driver Preparation
The NTC’s supplementary consultation paper indicates that existing vehicles were expected to comply with the proposed requirements, with transitional provisions to be considered where necessary.
This means operators should avoid assuming that extensive fleet modifications will automatically be required.
A more practical approach is to assess existing equipment, identify genuine differences against the final requirements and determine whether modifications are necessary before committing to expenditure.
Driver competency requirements also deserve careful consideration.
AEC clause 8.4.3 already addresses Category 3 driver requirements, including age, licence history, supervised driving experience, knowledge of hazards and medical fitness.
The requirement for 50 hours of supervised experience is therefore not new. Similarly, the 12 month licence history condition does not necessarily mean an experienced driver must complete an additional year of waiting.
Queensland provides an example of how these requirements are currently administered.
Category 3 applicants must provide employer evidence confirming 50 hours of supervised driving. Queensland’s licensing guidance also requires relevant competency evidence, a medical certificate and a Queensland Explosives Security Clearance.
Operators working across state borders should confirm the requirements applicable in each jurisdiction rather than assuming Queensland’s arrangements apply nationally.
Technical Provisions Requiring Careful Review
The October 2024 consultation draft contains several provisions that operators should examine when assessing their readiness.
The following details relate specifically to the consultation draft and must be checked against the final adopted Code.
Topic | Proposed provision |
Driver authorisation | Clause 1.8.11 addresses EX and EX3 vehicles. Operators should compare its scope with existing driver authorisations. |
Fire extinguishers | Clause 8.1.4.2 includes a 2 kg engine or cab extinguisher. Category 2 adds at least 4.5 kg in the load area. Category 3 adds at least two extinguishers totalling 9 kg, including one of at least 4.5 kg. |
EX3 protection | Clause 9.3.4.6 addresses additional firefighting equipment and an alternative arrangement. |
Compartments | The 25 mm insulation provision under clause 6.16.2 concerns Category 3 compartments. Relevant exceptions must also be considered. |
Markings | Under clause 5.3.7.1, the reflective explosives mark is conditional on Class 1 placarding being required. The 150 mm dimension refers to letter height. |
Documentation | Clause 5.4.1.2.1 specifies explosives transport document particulars. These must be distinguished from manufacture date markings required on relevant packages under AEC clause 3.2.4. |
Security | Chapter 1.10 criteria and exceptions must be considered. Load category alone does not determine every security obligation. |
The distinction between proposed and existing requirements is particularly important. Businesses should avoid introducing unnecessary operational changes based solely on consultation material.
What Customers Should Provide Before Booking
Effective explosives transport begins well before a vehicle arrives for collection.
A clear booking process allows carriers to assess the consignment, confirm their capability and identify potential compliance issues before allocating equipment or personnel.
Customers should agree on the information required by their carrier and verify it against applicable regulatory requirements.
This should include:
- Product identification: UN number, proper shipping name and classification code, including division and compatibility group.
- Consignment quantities: Number and type of packages, net explosive quantity (NEQ), gross mass and clearly identified units and totals.
- Approvals: Relevant classification, packaging or transport approvals, including conditions that may affect carriage.
- Collection and delivery arrangements: Locations, receiving hours, authorised contacts and contingency arrangements where delivery cannot be completed.
- Other goods: Details of any additional goods intended for the same movement, including return or waste consignments.
Customers should also establish whether the carrier can accept the specific product, quantity and proposed route.
Where subcontractors or intermediate depots are involved, responsibilities for compatibility checks, documentation and delivery acceptance should be clearly established.
Appropriate insurance evidence should form part of carrier selection, with responsibility for resolving discrepancies agreed before dispatch.
Small Consignments Still Require Proper Assessment
One area requiring particular attention is the distinction between Division 1.4S explosives, low hazard explosives and dangerous goods transported in limited quantities.
These descriptions are not interchangeable.
The NTC’s Class 1 factsheet identifies specific eligible UN entries and conditions for limited quantity transport. Classification as Division 1.4S does not, by itself, establish eligibility. [6]
Customers should therefore obtain a product specific acceptance decision rather than assuming that a small explosives package can automatically move through a conventional freight network.
Planning the Entire Transport Journey
The proposed reforms also address journey planning, including route selection, stopping arrangements, security and communication with drivers.
For carriers and customers, this provides an opportunity to review how existing procedures respond to operational disruptions.
Consider an overnight delay, a vehicle breakdown, a rejected consignment or a receiver who is unexpectedly unavailable.
In each situation, operators should understand who has authority to make decisions, where the vehicle may lawfully remain and how alternative delivery or storage arrangements will be confirmed.
For interstate movements, a route based register of applicable authorisations, operating conditions and eventual transition dates can support more consistent decision making.
Operators should seek clarification from relevant regulators regarding continued recognition of existing vehicles, licences, approvals and exemptions.
Recording these responses will help prevent dispatch teams from having to resolve regulatory uncertainty while a consignment is awaiting movement.
It is also important to recognise the scope of the proposed reforms.
The provisions discussed in this article concern road and rail transport. Where a shipment includes an air or sea component, the applicable modal requirements and handover documentation must be assessed separately.
Acceptance for one stage of a journey should never be assumed to establish acceptance for every subsequent transport leg.
Preparing for Implementation
Although the final requirements and commencement arrangements are still to be confirmed, businesses can begin preparing without assuming that every consultation proposal will be adopted unchanged.
For carriers, a practical preparation programme should include:
- Review transport activities. Record the products, quantities, routes and transport activities currently undertaken, including subcontracted movements.
- Assess existing compliance arrangements. Review vehicles, driver authorisations, training records, security measures and operating procedures against current requirements.
- Establish a change register. Clearly distinguish existing obligations, consultation proposals and confirmed adopted changes.
- Allocate implementation responsibilities. Once final requirements and transitional arrangements are published, assign each relevant change to a responsible person, with an appropriate budget and completion date.
Customers should undertake a corresponding review of their booking information and carrier selection processes.
The objective is to ensure that consignments can be accepted reliably, transported in compliance with applicable requirements and delivered to an authorised receiver.
Preparation should be based on verified regulatory obligations and genuine operational gaps rather than assumptions about the likely impact of the reforms.
Final Reflection
The proposed incorporation of explosives transport provisions into the ADG Code represents an important development in Australia’s dangerous goods regulatory framework.
However, the transition should be approached with a clear understanding of what is already required, what has been proposed and what will ultimately become law.
For established explosives operators, the reforms provide an opportunity to review existing systems and identify where adjustments may be necessary.
For businesses considering entering the Class 1 transport sector, they reinforce the importance of understanding the authorisations, equipment, personnel and operational controls required before accepting a consignment.
Ultimately, successful implementation will depend on accurate regulatory interpretation, effective planning and clear communication between customers, carriers and regulators.
The priority is not simply to prepare for a revised Code, but to ensure that explosives transport continues to be managed safely, lawfully and consistently throughout the transition.


